木门装置需留意什么?

　　木门装置需留意什么?

　　Wooden door device needs to pay attention to what?

　　在家居装修装修的过程中，木门能够说起到极好的装修和保护的效果，所以不少人在木门挑选的过程中精挑细选精雕细镂。可是我们是不是是知道在木门装置的过程中一些必要的细节是不容疏忽的。那么下面就是关于木门装置要留意的8大细节的介绍。　实木复合

　　Decorate in household decoration, wooden door can be said to have the excellent decoration and protection effect, so many people in the process of wooden door pick selective JingDiaoXiLou. But if we know some necessary details in the process of wooden door device is not allow to neglect. The following is about 8 big wooden door device to pay more attention to details. Solid mu fu to join a

　　木门装置需留意的7大细节

　　7 big wooden door device needs to pay attention to details

　　1、转移实木门板的时候尽量防止划伤或许碰伤门框和门扇，放置门框门扇时也需平稳的将其放置在不受阳光直射但又空气流通的室内水平地上上。记住将门框门扇斜靠放置，易损坏门框和门扇的。

　　1, the transfer of real wood door plank to prevent scratches may touch the door frame and door leaf, place the frame when the door leaf should also smooth place it in from the sun, but the air circulation of indoor levels on the ground. Remember placing frame door leaf leans, easy to damage the door frame and door leaf.

　　2、木门装置有必要在洞口地上工程(如：地砖、石材)装置结束，在墙面腻子刮完并打磨平坦后(墙面需贴墙砖、石材处的洞口，须悉数贴齐洞口侧边)后，才能够进行木门的装置过程。

　　2, wooden door device is necessary in the hole on the ground engineering (such as: floor tile, stone) end of the device, the wall be bored with child after scraping and grinding flat (metope to stick wall brick, stone in the mouth of the cave, must all stick together the hole side), wooden door of the device can only be carried out.

　　3、木门装置办法有必要运用预留洞口装置法，禁止运用边装置边砌口的做法。

　　3, wooden door device solution is necessary to use the reserved hole device, banning the practice of using the device and build by laying bricks or stones mouth.

　　4、木门装置时需查看洞口墙体湿度，假如装置洞口墙体湿度<25%，则正常可继续装置;假如装置洞口墙体湿度>25%，则应在装置的墙体上做好防潮隔离层。

　　4, need to look at the mouth of the cave wall humidity, when wooden door device if the device is the mouth of the cave wall moisture < 25%, can continue to normal device; If the device is the mouth of the cave wall humidity > 25%, should be moistureproof in device on the wall of isolation layer.

　　5、假如是转角墙或丁字墙处装置木门的话，在装置前需如今无门垛的那一侧做面宽度巨细不少于50mm的"假墙"。当然此处的假墙宽度可根据线条宽度来断定，防止两旁边面展示出的门边线不对称。

　　5, if be a corner wall or wall part t device, wooden door in front of the device should now unable to buttress the width is unequivocal that side do not less than 50 mm "wall". Here, of course, false wall width can be decided according to the line width, prevent the two side surface shows the door of the asymmetry between the lines.

　　6、若门框是用MDF资料制造的，那在拼门框时需用螺丝拼框;若门框是用多层板或实木板制造的，那在拼门框时则可运用铁钉固定。实木复合门

　　6, if the frame is made of MDF material, that when spell door frame need screw spell box; If the frame is made of laminated or solid board, that can use nails fixed when spelling a frame. Solid wood composite door

　　7、装置门框时必定要将门框调整好笔直度，防止打上发泡剂时，由于发泡剂的枯燥发胀效果而损坏门框。

　　7, device when the door frame adjusted straight degree must prevent on foaming agent, as a result of the foaming agent boring distention effect and damage the door frame.

　　一扇门的装置看似简单，其间蕴含着主要的装置质量问题，您千万不可过分粗心。关于以上的一些留意细节要有了解和参阅。

　　A door device looks be like simple, it contains the main device quality problem, you must not too careless. About the above should have understand and see some of the attention to detail.