木门各部件装置标准全解析?

　　木门各部件装置标准全解析

　　Wooden door parts device standard full resolution

　　如今的家庭装饰，选材都会挑选木质的资料，像门、窗户，这些当地的用材简直都是木质的，连室内的门，也是木质的，木质资料它的实用性很高，装饰性也很强，简直是首选，那么，室内木门装置要怎么做呢?有哪些装置标准呢?　品牌木门

　　Now family adornment, can choose woodiness data, select material like doors, Windows, these local material is wood, even indoor door, also is wood, woodiness material its practicality is very high, adornment sex is very strong, it is preferred, so, indoor wood door device to do? What are the unit standard? Brand wood door

　　一、套线装置标准

　　A standard, set line device

　　1、套线与墙、门之间用胶水固定，空地处用密封胶填缝。

　　1, set between walls, doors and fixed with the glue, empty is located in the sealant caulking.

　　2、套线接口处要达到平坦、密实无空地的请求。

　　2, set the line outlet to achieve smooth, dense without clearing the request.

　　3、同一边的套线应该是在同一个水平面的。

　　3, with one side of the line should be in the same horizontal plane.

　　4、套线装置的弯度答应差错在1mm以内。

　　4, set of camber line devices allow errors within 1 mm.

　　二、外观装置标准

　　Second, the device standard appearance

　　1、各衔接处的缝隙要用密封胶封好，空地不能大于3mm。

　　1, the cohesion of the gap to be sealed with sealant, space is not greater than 3 mm.

　　2、木门装置不能倾斜，要规整平一。

　　2, wooden door device cannot tilt, but trying to be neat.

　　3、木门外观没有划痕，纹理漂亮。

　　3, wooden door appearance no scratches, grain is beautiful.

　　三、五金装置标准

　　Three standards, hardware device

　　1、合页装置要平坦、无缝隙，敞开方向按请求装置，敞开要灵活自如。

　　1, the hinge device to smooth, no cracks, open direction according to the request, open to.

　　2、门锁装置要结实，装置方位要准确、标准。敞开流通，无反常动静。

　　2, door lock device to strong, device orientation to accurate and standard. Open circulation, no abnormal noise.

　　3、吸、闭门器以及拉手装置方位要准确，而且结实，螺丝钉等配件都要拧紧。

　　3, suction, door closers, and handle device location accuracy, and strong, screws and other accessories are on tight.

　　4、把门套装置好了后，应该是笔直的，仍是水平向上的，水平方向上的差错是在1mm以内，笔直方向上的差错是在2mm以内。木门品牌

　　4, well after the door cover equipment, should be straight, is still the level up, horizontal error is within 1 mm, straight in the direction of the error is within 2 mm. Wooden door brand

　　5、门套与墙之间用螺丝钉固定，缝隙用泡胶均匀涂改，封闭严实。

　　5 screws on, between the door and wall, gap with bubble is altered, the glue closed sealed.

　　四、门套装置标准

　　Four, the door device standard

　　1、装置门套的配件相连处要达到平坦、无缝隙、严密的标准。

　　1, the device is connected to the door accessories to achieve smooth, no cracks, strict standards.

　　2、配件要固定结实。

　　2, accessories to fixed firm.

　　3、对角线要精准，如果是2m以下，它的差错低于1mm，那么，如果是2m以上，差错就要低于1.5mm。

　　3, the diagonal to accurate, if it is under 2 m, its error less than 1 mm, so if it is more than 2 m, error is less than 1.5 mm.

　　五、门扇装置标准

　　Five, the door leaf unit standards

　　1、门扇装置整体要笔直、规整，而且要与门套齐平。

　　1, the overall door leaf device to straight, neat, and flush with the door.

　　2、门扇推拉顺利，无其它阻力，没有反常动静。

　　2, door leaf push-pull smoothly, without other resistance, no abnormal noise.

　　3、门扇关上后，密封条应该是不能够摇摆的。

　　3, after the doors closed, sealing strip should be not able to swing.